| Customization: | Available |
|---|---|
| Ice Making: | Spraying |
| Cooling Way: | Air-cooled |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Automatic Ice Packaging System Tube Ice Machine 
Tube ice machine features
1. Use hot Freon gas to make ice fall off fast with the whole process takes only 150~180 seconds.
2.After the ice is off, the water of low temperature is used for ice-making, saving energy consumption and increasing the volume of production of ice.
3.With the unique water distributive pan and air mouth, the water can evenly flow on the tube wall of the evaporator spirally, so it improves the efficiency of heat transfer.
4.The use of stainless steel SUS304,aluminum alloy plate-type evaporator, accords with the health and safety requirements.
5.The use of air pressure control excludes the risk of rupture of the evaporator tube and the tube ice diameter can be adjusted according to customers' needs.
6.Half-full liquid: liquid level controller which manages liquid supply of refrigerant makes the system more stable.
Your can check the ice machine video via
liermachine.en.made-in-china.com
Ice making process
As shown, when refrigeration system start to operate normally, low temperature refrigerant liquid enters into shell (04) through refrigerant inlet, and it exchanges heat with water inside heat exchange pipe (06). After heat is absorbed and evaporated, it runs back to compressor through refrigerant outlet. Water in the tank (13) is pump out of water outlet (09) and delivered up to the inlet (03) of tank (01). After water goes across the distributive pipe (02), it downwardly flows along the wall of heat exchange tubes (06) and forms water film. The water then begin to exchange heat with the refrigerant outside the heat exchange tubes (05). When temperature lowers down, water freezes and ice formed inside heat exchange tubes (06)
Ice doffing process
As ice reaches a certain thickness, water route system stops circulation. Reduction gear (07) begins to run, and outside heat exchange tubes (05) is replaced by hot refrigerant gas which then melts the surface of ice. The ice harvests from heat exchange pipe (05) because of gravitational force and falls into ice cutter (08). Ice column finally is cut into 30-50mm length pieces of tube ice. Tube ice drops down and threw to ice outlet (12).
Ice packaging Machine Function:
1, It can be saved and modified for various packing parameter settings, and has power to maintain function even when stop power.
2, The data is automatically saved after power failure.
3, Bags counting function.
4, Dust technical requirements (no).
5, Utility consumption.
5.1, power supply:Packaging machine: 380V/50Hz, servo motor: 220V/50HzControl
power: Packaging machine adopts DC24V safer than 220V/50Hz. Total power: 6.0KW.
5.2, gas supply :0.5-0 .7 MPa.
Application
drinks mix/ decoration, keeping vegetable and seafood fresh, all industries etc.
Automatic Ice Packaging System Tube Ice Machine
operates on an intermittent cycle, for example 18 minutes ice making and 3 minutes ice harvesting per cycle based on external diameter of 35mm specification ice tube;
The internal diameter of tube ice can be adjusted according to ice making time;
The evaporator employs SUS304 material and the heat exchange tube is designed at the most optimized thickness, combined with specialized heat treatment processing technology, which makes the best use of heat conductibility;
Stainless steel cutters driven by gear motors are uniquely designed to produce cylindrical ice;
High quality stainless steel for all water and ice contacting surfaces which are corrosion resistant and easy to clean;
Tube ice machine is furnished with sub cooler, which ensures the energy efficiency of the system and gets the higher C.O.P;
Rapid harvest and quick recovery due to hot gas defrost;
Highly efficient Bitzer piston compressor;
Self-diagnostic indicator light and electronic temperature controls;
Warranty period : 12months
Parameter
| Model No | LT-5T | LT-10T | LT-15T | LT-20T | LT-25T | LT-30T | LT-40T |
| Ice capacity | 5000kg/d | 10000kg/d | 15000kg/d | 20000kg/d | 25000kg/d | 30000kg/d | 40000kg/d |
| Cooling capacity | 34.85 | 65 | 93.75 | 148 | 188 | 222 | 297 |
| Input power (kw) | 20.5 | 38 | 51 | 70 | 85 | 105 | 139 |
| Instal power (kw) | 29.85 | 64 | 85 | 120 | 120 | 150 | 180 |
| outlet water temp.: | -5~-8ºC | -5~-8ºC | -5~-8ºC | -5~-8ºC | -5~-8ºC | -5~-8ºC | -5~-8ºC |
| Cooling mode | Water cooling | Water cooling | Water cooling | Water cooling | Water cooling | Water cooling | Water cooling |
| Net weight (kg) | 1500Kg | 2300Kg | 2600Kg | 2600Kg | 2800Kg | 2800Kg | 3500Kg |
Automatic Ice Packaging System Tube Ice Machine
Automatic Ice Packaging System Tube Ice Machine
Tube Ice applications include:
* Human consumption
* Port ice plants
* Hospitals
* Supermarkets and convenience stores
* Aquatic and fresh food preservation
* Logistic fresh preservation
Tube Ice Machines are suitable for refrigerant R404a and R507
){kind=link}